Description of Course

Learn how to estimate measurement uncertainty for pipette calibrations and measurements in accordance with ISO/TR 20461:2023. This uncertainty training course covers how to find and calculate all significant contributors to uncertainty for pipette calibration performed using the gravimetric method per ISO 8655-6 and ISO 8655-7. Plus, you will learn how to make your uncertainty budgets, calculate CMC uncertainties, and add them to your scope of accreditation.

This course has everything you need to estimate uncertainty for pipette calibrations. It is recommended for ISO/IEC 17025 accredited calibration laboratories, consultants and auditors familiar with pipette calibration that need to estimate uncertainty for their results or audit uncertainty budgets.
This course is not applicable to estimating uncertainty for volumetric measurements made using pipettes.

In less than 3 hours, you will learn how to estimate uncertainty for pipette calibrations so you can stop spending hours looking up useless information online or reading guides that you do not understand.

I will walk you through the entire process step-by-step and give you the tools (i.e. calculators) you need to estimate uncertainty.

Plus, you can watch me calculate uncertainty from start to finish for pipette calibrations in the demonstration video. This will allow you to follow along and complete your first pipette uncertainty analysis. I will show you how to do it all in less than 42 minutes.

Topics Covered in This Course

Here is what you can expect to find in this course:

1. Sources of uncertainties for pipette calibrations per ISO/TR 20461:2023
2. How to evaluate your Type A uncertainties
3. How to evaluate your Type B uncertainties
4. How to use ISOBudgets Pipette Uncertainty Calculator Templates
5. How to make an uncertainty budget
6. How to calculate CMC uncertainties for your scope of accreditation

Time to Complete

2 hours 19 minutes

Included In This Course

Here is what is include with this course:

1. 3 month access to all video lessons and demonstrations
2. All uncertainty calculators used during training
3. All PowerPoint Slides
4. PowerPoint Handouts (if you want to take notes with the slides)
5. Training Certificate (Upon Completion) with CE credit hours

Additional Information

Here is additional information that you may find important:

1. 4K resolution video (other resolutions are selectable)
2. Closed captions available (English)
3. Available on demand 24/7 on any device
4. Videos can be cast to training room televisions